What if it Snows?

Saturday, that was 25k acres and had 395 closed between Minden and Topaz.

 

Heads ???? Sounds like you may have been raised of had relatives in the mountains. Some people called it "skim".
"

 

If you had stopped and set., you might have got a "winter storm" experience. Don't like the weather you are in, go drive thru Amarillo.

 

Well I called All States Ag Parts. The water pump is a weird one and I must send it in for repairs. $109. Seems the 40 industrial did something different and it is some what custom now. Looks as if this wont get done any time soon. sigh Would have liked to finish this before end of summer.

Like the title. What if it Snows? Might be closer to true

 

Is it possible to pull your old pumps pulley and press it on the "new" pump, making it work? Assuming pump face mounting is OK.

 

I'll try to get caught up after my nap, guys. I missed a lot.. i know. The holiday weekend screwed up my sleep (or non"?) schedule.

 

Ah, an apostle... I've been told that you set the "mash" up in a second hand
oak whiskey barrel with a "coconut" sack spread over top. (Bigger and coarser weave than a "toe" sack" for adequate ventilation). You can get too much "sour mash".

 

The pulley is for a larger shaft on the old pump. New pump has an 5/8" shaft. Old pump is 3/4". New pump stands 4" tall. Old Pump iis 8" tall. Old pulley when set on new pump rubs on base of new pump and new pump is too short to reach bottom of pulley hole. There is no way to use new pump. The fan is mounted to an extension that is another 8" further forward.

here is only pic I can find of the unit when mounted.

Where the extension bolts to the pulley is 3 inches in diameter. The new pump the mounting surface is tiny at about 1.5 inches in diameter. Adapting could mean torquing the pump.
Here is the link on the rebuild
Remanufactured Water Pump Massey Ferguson 40 2200 4500