I'm with Zeviander on this one. Flat tops look cool like COE's but I would sure hate to have to live in one for 2-3 weeks at a time.
Where is everyone #5
Discussion in 'Flatbed Trucking Forum' started by DDlighttruck, Aug 27, 2017.
Page 9967 of 21438
-
1951 ford, cke, exhausted379 and 8 others Thank this.
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
4 - 1" bolts with 3"x 3" plates make great feet under a table. Put a hole on the bottom side and weld a nut over it. Unless you drill through the top and the bottom, you will not be able to screw the bolt all the way up and still have it long enough to reach the floor.
As far as the chop saw, put your supports 3-1/2" (or the height of your saw base) below the table top. This way, the saw base/saw vise will be level with the table top and you have a table to support the steel you're cutting.
The only thing I would have done different, is move the casters in just a bit and put the screw in feet directly under the post. This will direct any force from hammering straight down the leg to the ground. Instead of down the leg, onto the cross brace and then to the floor.PoleCrusher, RedForeman, cke and 14 others Thank this. -
1951 ford, PoleCrusher, cke and 6 others Thank this.
-
1951 ford, sawmill, PoleCrusher and 10 others Thank this.
-
2 words: Car Port!!PoleCrusher, cke, ShooterK2 and 9 others Thank this. -
EDIT1951 ford, sawmill, PoleCrusher and 4 others Thank this. -
I know a lot you guys have a thing for long hoods and so do I but, for my use my 387 is both more comfortable and allows me to haul my 48' trailer with 65' OAL.
I don't generally stay at truck stops unless I have no other choice, with a few creature comforts I can road camp like the best of em.
StevewhoopNride, 1951 ford, sawmill and 18 others Thank this. -
whoopNride, 1951 ford, sawmill and 11 others Thank this.
-
1951 ford, PoleCrusher, cke and 9 others Thank this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 9967 of 21438