Truckers Report Jobs

Find Trucking Jobs

Company Driver Company Driver Dry Van Dry Van Flatbed Flatbed Refrigerated Refrigerated Specialized Specialized Owner Operator Owner Operator
More Trucking Job Searches ⌄ Fewer Trucking Job Searches
⌃

wiper problem

Discussion in 'Kenworth Forum' started by sean1966, Jan 29, 2013.

  1. Jan 29, 2013 #1
    sean1966

    sean1966 Bobtail Member

    9
    0
    Jan 27, 2013
    Bedford,Pa
    0
    Wipers quit working in low and delayed. They only work in the fast mode. Is it a wiper motor problem or maybe just a wire?
     
    sean1966, Jan 29, 2013
    sean1966, Jan 29, 2013
    #1
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Jan 29, 2013 #2
    bikertrash61

    bikertrash61 Light Load Member

    127
    75
    Nov 20, 2012
    Pennsylvania
    0
    Probably the wiper switch itself. Especially if its in with the turn signal lever.
     
    bikertrash61, Jan 29, 2013
    bikertrash61, Jan 29, 2013
    #2
  4. Jan 29, 2013 #3
    sean1966

    sean1966 Bobtail Member

    9
    0
    Jan 27, 2013
    Bedford,Pa
    0
    it is with the turn lever. I will check that.Thanks
     
    sean1966, Jan 29, 2013
    sean1966, Jan 29, 2013
    #3
  5. Jan 29, 2013 #4
    sean1966

    sean1966 Bobtail Member

    9
    0
    Jan 27, 2013
    Bedford,Pa
    0
    should of read your reply better. Its not in the turn signal lever.Its a knob in the lower left dash.
     
    sean1966, Jan 29, 2013
    sean1966, Jan 29, 2013
    #4
  7. Jan 29, 2013 #5
    W900KW

    W900KW Light Load Member

    52
    14
    Jan 18, 2010
    south dakota
    0
    had that problem years ago and it was the motor itself, you can check the output of the switch if good it is your motor.
     
    W900KW, Jan 29, 2013
    W900KW, Jan 29, 2013
    #5
  8. Jan 29, 2013 #6
    sean1966

    sean1966 Bobtail Member

    9
    0
    Jan 27, 2013
    Bedford,Pa
    0
    Pulled the panel of the dash off and could feel the switch pulsing when moving through the delay settings and to low and high. Only high works. Guessing its the motor
     
    sean1966, Jan 29, 2013
    sean1966, Jan 29, 2013
    #6
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.