When I make a tight turn my trailer will get stuck on the tractors frame and or tires. Its pretty bad almost shuts off the truck from the trailer weight hitting the drive axle tires.
Dont know specs to well but the semi is a 2012 Coronado. 3 axle.
Pulling a walking floor for ag commodities. what can I do to fix this.
Trailer hitting frame and tires
Discussion in 'Heavy Duty Diesel Truck Mechanics Forum' started by Gabrieldjr, Mar 9, 2020.
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Mike250rs, truckdriver31 and HoneyBadger67 Thank this.
-
Move your 5th wheel away from cab. If you can, keep weight distribution in mind.
truckdriver31 Thanks this. -
If this is a new problem check the ride height suggested by Snailexpress. If you've just paired this truck to the trailer. You may need to add a block between your 5thwheel and frame.
truckdriver31 and magoo68 Thank this. -
It may seem obvious (or not) but is your suspension switch in the 'up' position? Up as in not dumped.
Flat Earth Trucker, truckdriver31 and VIDEODROME Thank this. -
Check overall height see if you can run a higher profile 5th wheel?
truckdriver31 Thanks this. -
Some live bottoms and grain belly hoppers require the fifth wheel to be up to 4 inches higher for tractor clearance.
Snailexpress Thanks this. -
When I pulled a hopper, I got two pieces of heavy duty steel tubing,length of the 5th wheel, then had holes measured and drilled at machine shop, and raised 5th wheel almost 4.5 inches.
Snailexpress and SmallPackage Thank this. -
probably need a taller 5th wheel.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.