I use a Blue Parrot B350. It's so lightweight and the head band so flexible that even some of the smaller bumps are able to get it airborne high enough to fall off my generic 3M command hook.
I need something where the hook part is taller so it can't get high enough to fly off OR I need some way to steady it so it doesn't bounce and sway quite so much.
Any suggestions?
Hook for Headset
Discussion in 'Trucking Electronics, Gadgets and Software Forum' started by madmoneymike5, Jun 5, 2020.
Page 1 of 2
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
It’s not pretty, but I use a wire coat hanger. Cut it down to the size I need and bend it so it has a big hook so my headset won’t bounce out it. Used it for a couple years, works great.
NavigatorWife and D.Tibbitt Thank this. -
NavigatorWife, T.Rucker, ACO476 and 1 other person Thank this.
-
-
I hang mine off passenger side armrest...
bad-luck and NavigatorWife Thank this. -
Thanks for the responses, folks! My thoughts on each suggestion follows...
But I do have those flexible rubber wire ties. Not super stoked about that idea, but if all else fails...?
There was once a product I saw in a truck stop but can't find now. It was a headset hanger. Any ideas?NavigatorWife Thanks this. -
besides my catch all, just my notebooks ride in dummy seatNavigatorWife Thanks this. -
-
I use this hook mounted to the bottom of the upper dash (above the windshield) it will sway but you really have to hit a serious bump for it to pop out...
Hookster (black) -
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 1 of 2