Recently switched trucks from an old Columbia to a 2014 cascadia. Somebody has removed the 12v accessories plug by the cupholder and ran this wire through it. Its driving me insane just sitting there. I drive in town and dont have any ELD or GPS or Computer in the truck which I assume is probably what this is for. I want to make sure that's what it is before I cut it off. I attempted to find the ends of the 4 wires to just pull it back through but no dice. PLEASE HELP!
what is this cable?
Discussion in 'Questions From New Drivers' started by s0m30n3, Jun 30, 2020.
Page 1 of 2
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
farmerjohn64 and AModelCat Thank this.
-
-
Looks like for an eld
farmerjohn64, rachi, Tb0n3 and 3 others Thank this. -
farmerjohn64, lovesthedrive, s0m30n3 and 1 other person Thank this.
-
Shove it back down the hole?
farmerjohn64, Roger McG, rachi and 5 others Thank this. -
Haven’t you ever seen The Wizard of Oz?
Never, Ever go down the hole.
In other words, leave well enough alone.farmerjohn64, Snailexpress, rachi and 2 others Thank this. -
Because of the connector it wont fit back through the hole. I took the metal panel (with the fifth wheel slide lock and diff lock switches on it) off above the cup holder and each wire connected to the plug in the pic seems to go a different direction so unplugging and pulling it through seems like a PITA... TY everyone for your time a d quick responses
farmerjohn64 Thanks this. -
You can just cut it off tape wires individually and then together, make it disappear, till you have time to properly disconnect it. My fuel filter heater wires, and idle timer wires are taped off that way. 11 yrs now, haven’t gotten a chance yet. Lol.
farmerjohn64, kemosabi49 and s0m30n3 Thank this. -
Lol Sweet. Thanks again guys
farmerjohn64 Thanks this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 1 of 2