Way to go on ham. Always preferred the ascend of the hog to the shoulder pork and ham (Spam).
What if it Snows?
Discussion in 'Questions From New Drivers' started by Dave_in_AZ, Mar 19, 2018.
Page 8961 of 18559
-
Rideandrepair, LoSt_AgAiN, lovesthedrive and 3 others Thank this.
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Lumper fee was $0.00172 per carrot. The worst part about the delivery by was the count. It took them about 11 hours to get the count straight. I think they lost count in the middle of the first go round so had to restart.
Rideandrepair, Speed_Drums, dwells40 and 8 others Thank this. -
@Dave_in_AZ I got an electrical question...
So ive been thinlimg about my future shop. It will require 3-Phase electrical service to power some machine tools (mill and lathe). From my understanding, if one has 3-Phase power one can pull Single-Phase power from that to power regular electrical item.
My question is, is it possible to have 3-Phase service into the Shop and pull a single-Phase line from the Shop to supply power to the house? This way I only have one meter and one electric bill. How difficult is this to do???Rideandrepair, Dale thompson, dwells40 and 4 others Thank this. -
Rideandrepair, Dale thompson, MACK E-6 and 3 others Thank this.
-
Also probably want to charge you for cost of bringing the 3 phase from its now available point down/up/across to your need point.
In Tupelo, city had a nice add on to bring it a few blocks when Clark Equipment moved in to a new building. And all we had on 3 was an air compressor.Rideandrepair, Dale thompson, LoSt_AgAiN and 4 others Thank this. -
Rideandrepair, Dale thompson, dwells40 and 3 others Thank this.
-
The only place you may get hung up is if you're utility company will allow the shop to count as the metered structure or dwelling.
3 phase is primarily for commercial purposes.
So I'd start with your utility company and go from there, or ask a local electrical contractor, cause every place has their own little set of local rules.
If you're not going to use the shop a whole lot, they make phase converters.
That will turn single phase into 3 phase. They are horribly inefficient though, and will suck a ton of power.
3 phase primary would be best. Than you just sub feed the house panel with 2 hots.InTooDeep, Wasted Thyme, Rideandrepair and 8 others Thank this. -
Rideandrepair, D.Tibbitt, Dale thompson and 5 others Thank this.
-
Thank you for the info, I know a good electrician that I'll give a call when I get closer... He's done alot of work on commercial worksites I've been on in the past.Rideandrepair, D.Tibbitt, Dale thompson and 7 others Thank this. -
homeskillet, Rideandrepair, D.Tibbitt and 8 others Thank this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 8961 of 18559