TriPac Apu

Thank you, I appreciate it, It seems to be working fine hooked up in box just likes to kick on when voltage reaches 12.9, so kicking on quite often, hoping the computer program someone is sending me will do the trick to adjust kick on voltage down to about 12.2. If not I’ll take it to a thermoking dealer

 

just plug in a laptop and use the free Tripac Service Tool, you can adjust all your own settings for voltage, min run time, temps, view and clear codes, etc



Thermo King TriPac Evolution Diagnostic Tool

 

My unit is the older version, not the evolution. Will this software still work?

 

I used to do it at Tk on the old units but I cant remember if you just plug it into the laptop it's been so long.For some reason I think that wont work but you could try it.We would set them for 12.4 volts I believe.Good luck

 

And whare do you plug it in on the APU?

 

Check on the wire harness for a plug to connect to.

 

Yeah that's right,there is an adapter to plug onto a USB connection.

 

Thanks for the reply
I never noticed a plug on mine i will look. Its a 2009 unit?