scangauge xgauge codes commands parameters series 60 12.7 14 list.

*** Detroit Series 60 12.7L*** Below there is a list of available additional gauges codes that were the result of a capture option that scan gauge has on its setup menu. However, out of 39 codes only 13 can be programmed into the scan gauge as an additional xgauge available for reading. Continue scrolling down to see the 13 available xgauges after scrolling the 39 below.

DO NOT KNOW IF THESE WOULD WORK ON A 14L ENGINE OR EVEN WORK ON EVERY 12.7 VERSION AVAILABLE. I have included engine configuration data, as the last attached image of the post, where these xgauge commands derived from for comparison purposes to the engine you are searching on.

1. F7 040C0000

2. FA 04050000

3. F4 04000000

4. 2C 3430AC46

5. B9 0000D55C

6. B6 0500B900

7. 6F C8B60500

8. 56 00AE7401

9. BB 6910A5FF

10. 60 78F504EA

11. F5 04000000

12. 80 F5807F01

13. 53 00445C10

14. 44 C8530044

15. 64 3C41FC44

16. C2 03ABA301

17. 79 005F3F01

18. 6C F053016A

19. AE 74016CF0

20. 6E B8A95C10

21. AC 8E010C5C

22. 7A 00A81601

23. 66 066B5C0F

24. A8 1A014680

25. 41 F3A81A01

26. 6A 3F013FA1

27. 5D 016A3F01

28. 59 815D016A

29. 47 0059815D

30. 46 80470059

31. 30 AC468047

32. AF 030330AC

33. B8 0000D25B

34. B7 3F00B800

35. 5C 10D80061

36. 5B 005C10D8

37. 55 015B005C

38. BE 69105501

39. 54 00BE6910

********************************************************************************************************

Extended Range Barometric Pressure (PSI)
TXD: 00
RXF: 013040000000
RXD: 0808
MTH: 0057000A0000
NAM: XBP

Torque Limited Factor (Torque Allowed over Available Torque) (%)
TXD: 00
RXF: 014400000000
RXD: 0808
MTH: 000100020000
NAM: TLF

Cruise Control Set Speed (MPH)
TXD: 00
RXF: 015600000000
RXD: 0808
MTH: 000100020000
NAM: CCS

Output Torque (lb-ft)
TXD: 00
RXF: 015D00000000
RXD: 0808
MTH: 001400010000
NAM: OTQ

Fuel Level (%)
TXD: 00
RXF: 016080000000
RXD: 0808
MTH: 000A00020000
NAM: FUL

Air Inlet Pressure (PSI)
TXD: 00
RXF: 016A00000000
RXD: 0808
MTH: 000100040000
NAM: AIP

Barometric Pressure (PSI)
TXD: 00
RXF: 016C80000000
RXD: 0808
MTH: 000A00100000
NAM: PSI

Coolant Level (%)
TXD: 00
RXF: 016F00000000
RXD: 0808
MTH: 000100020000
NAM: CLV

Engine Retarder Percent (%)
TXD: 00
RXF: 017A00000000
RXD: 0808
MTH: 000100020000
NAM: ERP

Air Inlet Temperature (Degrees Fahrenheit)
TXD: 00
RXF: 01AC00000000
RXD: 0810
MTH: 000100040000
NAM: AIT

Fuel Temperature (Degrees Fahrenheit)
TXD: 00
RXF: 01AE00000000
RXD: 0810
MTH: 000100040000
NAM: FTP

Engine Oil Temperature (Degrees Fahrenheit)
TXD: 00
RXF: 01AF00000000
RXD: 0810
MTH: 000100040000
NAM: EOT

Power Takeoff Set Speed (RPM)
TXD: 00
RXF: 01BB00000000
RXD: 0810
MTH: 000100040000
NAM: PSS

MANUAL SCANGAUGE AVAILABLE AT LINK: http://www.scangauge.com/wp-content/uploads/documentation/sgd-1-0/SGD_UM_101.pdf.



​

 

At scan gauge website they display parameters for other engine year models not including Series 60. Anyone looking for Series 60 may probably find what they looking for using this information or they could also do what you mention on your post.
Wouldn't know...if two options better than one still.