Should be a ground wire coming from the headlights and turn signal that is attached to the frame. Check and clean the ground wire.
1995 Peterbilt 379 Blinker Problems
Discussion in 'Heavy Duty Diesel Truck Mechanics Forum' started by Asanchez, Mar 30, 2026 at 6:29 PM.
Page 2 of 2
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
I found a similar issue once where a wire had worn through and would blow fuses pretty regular. It was under the steering wheel at the 1st steering knuckle inside the plastic cowling at your knee's when driving.
blairandgretchen, Luwi67 and Asanchez Thank this. -
Did you just install all the LED lights and now it doesn't work or did it work previously with all the LED lights?
Big Road Skateboard Thanks this. -
Truck has always had led lights since I started running it
-
Found the problem was the right turn signal indicator in the dash causing a short
blairandgretchen, wore out and JB7 Thank this. -
Same here but, with the city horn wire.
-
Was that a wire shorted or like a circuit board short?
Not much is more aggravating than losing turn signals over and over.
I turn all the lights on every morning and the emergency flashers and do a walk around. -
That is a new one - I know the CEL/SEL etc lights are the little blade bulbs in a twist lock - are the turn signal lights those too, and how was it shorted?
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 2 of 2