Support Thread for the TND 500, TND 700 or future Rand McNally products. (part two)

PST for me ( Oregon ) , FAT 32 ? I'll see prior to the remote hook together about the format of the card ( It's new and blank 16gb PNY Micro SD card ) THX again ... Stay frosty !

 

So I did open it up and pushed the pins on the micro usb slot to make the connection tight, this did not help. I used a needle to push the last pin on the right up. Lookin at the rear of the unit. I now have a solid connection to my DC cable. We will see how long this lasts. I run the 12 volt cable in my truck on my dash but will also tie it around the mount as well.

Thanks,
mehow

 

Hey Mark,

Any word on the issues I posted about August 28? I know you were out and about so no big deal. Got a couple more questions to go with it.

Noticing that my unit likes to randomly jump back in GPS position, sometimes half a state back for a split second, calculate from that position, then it returns to my current position, recalculates, and carries on. Sometimes at random it will just recalculate like its lost the plot a moment. Happens a couple times a day.

Also, the map updates for the others, is the tablet already on those maps or is there one coming for it too?

 

Google "JerkStopper" for aid in cord protection.

 

FYI - I had a customer with a 720 and a 730 both in his truck come in on Friday. I emailed you about this guy earlier in the week if you remember. I was asking you if you knew of any government outages in whatever state he was in that day. Anyway, both GPS's showed "No GPS" and in the GPS screen showed "0 seen of 11."

I took them out of the truck and they both found the signal. So I started unplugging things in his truck and it turned out to be the CB. And the real hitch with that was that it didn't help to just turn the CB off. I had to physically unplug the power connector from the back of it.