Leased to mercer

Discussion in 'Ask An Owner Operator' started by earnies2, Sep 5, 2016.

  1. earnies2

    earnies2 Medium Load Member

    691
    281
    May 17, 2012
    Dedham, MA.
    0
    Well it has been a long road Bought an 2009 International Prostar cummins power 13 speed 355 rears x Werner truck premium interior with swivel seats extra clean. Thermo King APU that works...new tires yokos on rear new A/C compressor and Clutch..took truck home sent it to a frame shop and streched the frame 30" now it has a 262 wheelbase with the 232 wheelbase and a headache rack and the 5th wheel all the way to the rear i only had inches in a turn between the trailer and the rack so i deceided to strech the frame, All new securement equipment. Painted the frame, new rear brakes, and drums, new air ride valve,changed the oil in the trany,and rear ends, droped the oil pan and did the oil pump mod,and changed the oil, and power stering oil and filter, found 3 air leaks 2 were miner one was the filter/pressure regulator on the trany,installed CB,satellite radio,dash cam,and GPS,servised APU then off to Nashville to pick up my new to me 2005 Fontain combo trailer it has aluminum wheels 2 boxes between the wheeels and 2 smaller boxes behind the landing gear and a dunnage rack on the drivers side.....picked it up then headed on to Louisville to lease on with Mercer that took 3 days and was ok the trailoe had no problems the tracktor needed a wheel seal and front shocks all set got it lettered by there sign guy who did a great job got all done friday afternoon and decided to head home to Boston rather than waight for a load on Tuesday I am getting Married on Saturday and didnt want to take any chances....sorry for the long post
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. zinita17601

    zinita17601 Road Train Member

    1,324
    1,613
    Aug 19, 2010
    lancaster pa
    0
    Did u fly to boston?
     
  4. savage02

    savage02 Light Load Member

    163
    50
    Dec 21, 2007
    Upstate, NY
    0
    Good luck I hope you are successful in your new endeavor!!! Just out of curiosity what did it cost to stretch the frame?
     
  5. CJndaTruck

    CJndaTruck Road Train Member

    3,349
    3,365
    Nov 21, 2014
    Knoxville, TN (area)
    0
    Welcome aboard.
     
    earnies2 Thanks this.
  6. colorado18spd

    colorado18spd Medium Load Member

    396
    298
    Mar 10, 2013
    0
    :)Blessings on the wedding
     
    RERM and earnies2 Thank this.
  7. earnies2

    earnies2 Medium Load Member

    691
    281
    May 17, 2012
    Dedham, MA.
    0
    No i drove i thought it was best to bring the unit home and give it a once over then getting married on Saturday then off on a cruise then back to work
     
    OLDSKOOLERnWV Thanks this.
  8. earnies2

    earnies2 Medium Load Member

    691
    281
    May 17, 2012
    Dedham, MA.
    0
    I got 3 quotes the lowest was $4100 the middle was $4500 and the high one was $7500 i went with the middle one better shop seemed more on scheduled timeline
     
  9. earnies2

    earnies2 Medium Load Member

    691
    281
    May 17, 2012
    Dedham, MA.
    0
    Thanks for the welcome i think i found a home so far i have met great people at Mercer
     
    CJndaTruck Thanks this.
  10. earnies2

    earnies2 Medium Load Member

    691
    281
    May 17, 2012
    Dedham, MA.
    0
    Thanks
     
  11. Gentlemanfarmer

    Gentlemanfarmer Medium Load Member

    365
    384
    Feb 26, 2010
    Greenville, FL
    0
    Welcome Earnie, glad everything went well in orientation. I am the driver you spent Tuesday night talking to and was parked next to you in the green Volvo. Congratulations on your marriage and hope to see you out on the road soon.
     
    OLDSKOOLERnWV and earnies2 Thank this.
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.