mercer transportation

One thing after another now... one of my head lights keep flashing with bumps lok

 

I can't answer your question but, the other day I took a load from a place I have loaded many times. On the load description it says insulation but the weight said singles. When i talked with the agent she said she doesn't know the commodity most of the time. I think alot of the notes are boiler plate some times.

 

Maybe a shop that make hoses and fitting?

 

Well they said there lots of gas in my oil and air filter on generator. But said it doesn't look like the carb is leaking hmmmm

 

Did this turn out to just be a bad or loose bulb?

 

No my led light plug got corroded and broke. Had to replace the wire harness for it and new head lights lol.

 

Anyone know where the grounds to the frame should be? I know there 1 to the starter. Where should the other one be?

 

Near the battery box. Just follow the ground cables off the batteries.

 

Thank you I'll check that one. Stupid question but can I replace that without removing the + cables on batterys

 

You only need to remove cables from batteries when dealing with the hot wires, not the grounds. The reason is so you don't accidentally let a hot wire touch the grounded frame/engine or another hot wire. A ground touching another ground doesn't cause spark.