hey guys I have a 2007 w900 with cat 15, when I turn on engine brake The whole truck and engine starts to vibrate heavy and the check engine light comes on sometime but goes fast I can’t figure out the flash code. Any thoughts? Thanks
Heavy vibration when I turn on engine brake
Discussion in 'Ask An Owner Operator' started by Moephilly1, Jan 12, 2019.
Page 1 of 2
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Dont turn it on?
-
Thats ur truck sayin "quit slowin me down driver!!!"
-
VV-heads? Chances are they are busted, crack the valve covers and check.
Moephilly1 Thanks this. -
I'm not familiar with CAT's, but if it has selector switch for low/med/high, see if it does it on each position. It'll help identify which cylinder(s) are the problem.
Tombstone69, 22dragoo and Moephilly1 Thank this. -
STAY OFF THE JAKE. Until you can take a peak into the rocker boxes. When is the last time you ran the Rack on your motor? If it has been awhile then you got one or two out of adjustment. If Trk is shuttering bad then do valve adjustment and re-bush jakes. Check number 3-4 cylinder first, they usually go before others. You’ll be fine as long as you don’t keep riding around singing the jake. Also check springs, a busted jake spring will cause vibration. Problem will reveal itself as soon as you look in the rocker boxes.
Moephilly1 Thanks this. -
I turn it on once a week, I’m not the type of driver who has it on 24/7D.Tibbitt Thanks this.
-
I dont usually use it it’s once in a blue when I really need it. I recently bought the truck so I’m not sure about that. I’ll take it to a shop Monday to check that out that’s for your help
-
Will do thanks for the help
-
It does it on all positions
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 1 of 2