Detroit won't start

Discussion in 'Ask An Owner Operator' started by Yankee02, Mar 31, 2019.

  1. Yankee02

    Yankee02 Bobtail Member

    10
    3
    Mar 31, 2019
    0
    2007 Detroit won't start after sitting for three months
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. xsetra

    xsetra Road Train Member

    5,103
    6,964
    Aug 21, 2011
    0
    What does it do or not do.
    Dead batteries?
     
  4. uncleal13

    uncleal13 Road Train Member

    3,797
    6,293
    Apr 9, 2009
    Humboldt, Sk
    0
    More definitive details please.
    Won’t start:
    - no electricity
    - clicks starter won’t turn
    - engine turns over won’t fire
    - etc
     
  5. blairandgretchen

    blairandgretchen Road Train Member

    13,321
    71,362
    Dec 9, 2011
    South west Missouri
    0
    Fuel filters changed and full?
     
  6. Tombstone69

    Tombstone69 Road Train Member

    1,010
    1,346
    Dec 20, 2018
    Jersey shore
    0
    Check the fuses to the ECM.
     
    I glide 47 Thanks this.
  7. Rideandrepair

    Rideandrepair Road Train Member

    17,268
    56,042
    Aug 8, 2015
    0
    Jumper cables,hooked up and charging for at least half hour, key on, if no check engine lights on dash, check fuse for ecm,otherwise crank it up, use either sparingly, if needed.
     
  8. Yankee02

    Yankee02 Bobtail Member

    10
    3
    Mar 31, 2019
    0
     
  9. Yankee02

    Yankee02 Bobtail Member

    10
    3
    Mar 31, 2019
    0
    Sorry all plenty of juice cranks great will only run on ether ran fine when turned off about 3 months ago
     
    Rideandrepair Thanks this.
  10. Rideandrepair

    Rideandrepair Road Train Member

    17,268
    56,042
    Aug 8, 2015
    0
    Sounds like ecm fuse located on hot cable near battery, small blade type. 10 or 15 amp? Or a bad ground on the frame. If that’s the problem , usually the yellow/ red check engine lights won’t illuminate on dash with key in on position.
     
  11. Rideandrepair

    Rideandrepair Road Train Member

    17,268
    56,042
    Aug 8, 2015
    0
    Otherwise if ecm is getting power, and no codes are thrown. Maybe a bad timing sensor or 2. Maybe just a bad connection on a timing sensor.
     
    HopeOverMope Thanks this.
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.