Thanks to @Rideandrepair
and @xsetra I got the doors open on my sleeper and the locks out.
Freightliner sent me a set of locks but they're actually for the door and the ignition and they're different than the sleeper. The sleeper locks are a little thinner and the body of them is threaded.
Freightliner tells me they have no listing whatsoever for these locks that go into the sleeper doors.
Does anybody have any idea where I can buy a set of locks for that? I did try to Google it but I came up empty.
Fld120 sleeper locks
Discussion in 'Ask An Owner Operator' started by Dino soar, Jan 20, 2020.
Page 1 of 4
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
You gave them the VIN and they still sent the wrong locks?
Cabinover101 and Rideandrepair Thank this. -
When I called back tonight another Parts guy looked for it and he said there's nothing on the diagram they have nothing to look up for it.Rideandrepair and blairandgretchen Thank this. -
Rideandrepair Thanks this.
-
I either need new locks or I will put stainless bolts and washers in there and make a pull cord on the inside.
But I would rather have the regular locksets.Rideandrepair and blairandgretchen Thank this. -
May be a truck boneyard.
PE_T, Rideandrepair, Dino soar and 1 other person Thank this. -
Did You try different Dealers? I recently found my speedometer, at Freightliner, after 3 different Dealers said they were unavailable. It has a digital Odom/ Trip. But is plug and play, an upgrade. Took the Guy 20 minutes chasing bulletins to find it. The vin # system is good, but aggravating also. Most can’t do any parts chasing without the vin. My vin shows 1 clutch fan, it’s expensive, special build to order. Turns out there’s a dozen more common and readily available part #s that fit it. You never know what might work, even an old trunk lock, from a GM car. I’m starting to see parts becoming obsolete on my 2000, at least they’re not selling many. Unless it’s a real good parts Guy. Most are useless without a vin #.
beastr123, xsetra, PE_T and 1 other person Thank this. -
Well, I called the Dealer, same thing, can’t find the side door lock. I did get a part# for sleeper big escape door lock. Might be the same one. I’m not sure. Costs $10. Part # BRS 608432 It says non coded lock. So I guess it will have to be a different key, Can’t match it up with ignition and doors. There’s so few keys combinations, might get lucky, though.
-
I found this on Raney's website. It is for Cascadia, looks very similar to FLD120 bunk lock.Dino soar and Rideandrepair Thank this. -
Let me look around the shop tomorrow, think i might have a set or two. I seldom throw anything away and i know i have a lot of old FLD parts.
Dave_in_AZ, Dino soar and Rideandrepair Thank this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 1 of 4