Lost control power

Check the battery and the connections,make sure they are tight.Make sure the maintenance switch inside the side door is switched on.If all that is ok then open the control box and check for 12 volts at the board,if so check for a flashing green led light on the board.

 

Hey I did all that. Everything is good. But unit will run for awhile then cut off again with the same message

 

When it cuts out is there still 12 volts at the board?

 

Hey I’m having the same issue with my unit. Can’t figure out what’s the real problem. Help

 

Is there 12 volts at the board when it cuts out?

 

Yes. Still 12 volts at the board when unit cuts off

 

Ok well sounds like it's the board unfortunately.Do you have any other 210 or are you a single trailer operation?

 

Single unit operation

 

Ok,I was gonna suggest swapping the board with another unit.If everything else (connections etc.,)seem ok I guess you could buy aftermarket on line.Of course you can take it to Tk, make sure you ve got lots of money if you do that though.