Changes to QC logging parameters

There are still bugs to be worked out. Will they be worked out? Most likely not, but I have found that if you manually go to driving when you leave, it will work better. Example, I was at a place moving around off duty for 33 minutes, showed my 30 minutes had been met, left and let it automatically go to drive and part of that 33 minutes was shown as driving, so it took the 30 minute break away. Yesterday did the same thing, when I got ready to leave, I manually went to driving as I was pulling out and all was good.

 

That's the best way to do it. Don't let it automatically go over to driving.

 

You can move around the TS, or wherever. Just keep an eye on your status and do everything manually.

 

That and based on my so far linited testing, shuttingvthe truck off keeps it from kicking over before you want it to.

As for the treshold. I have an excellent baseline to compare to coming out of obetz. Will test that again on monday.

 

Mine did the exact same thing to me yesterday. I was parked on off duty for an hour after I had been to the Laredo yard for inspection. I had left the yard and sat for 40 minutes trying to creepass about a mile in the traffic. Was still showing off duty. He moment the traffic broke and I could start rolling, it flipped all that time as drive time. Lost 40 minutes which is now going to make new late to a delivery on Monday.

The other this update did mess up the rest of my logs. I should have had enough recap hours to make this trip. Even my notes when I was trip planning show I should have gained more hours then it's now showing, but after the update the next couple days all I show for recaps is 6 hours instead of the 21 I should of had.

 

My belief is the threshold works from the long/lat coordinates not a specific distance traveled unless its "excessive" within a diameter.

My truck shows .7 miles is the threshold. But have traveled farther than that before it kicks over on the screen.

 

To edit logs
Go to approve logs
Pick the log you want to edit
Hit edit at the bottom and change it to whatever
You can not edit drive time only on and off duty
Pretty sure that is how it is done

 

Yep with a reason. osr suggested "correction" is sufficient. Of course add whatever note with the duty status that applies.

 

I just put in ERROR every time I need to edit.

 

Are you still able to edit On Duty times back to Off Duty? Reason I ask, say a guy likes to get his oil changed during the ten hour break. Shut down, usually they say they will call a few hours when they are ready for you to bring your truck in. So say the 14 hour clock expired, go On Duty ease over to the oil pit and On Duty back to the spot and edit it all back to OffDuty and finish the ten hour break. Is this do-able?