What’s up Guys.
I got a 1999 Freightshaker Century with an S60 12.7 Detroit.
Fan should be coming on when water temp his 180 degrees, but it doesn’t. I have to maually use my engine fan switch everytime now. Do you guys have any idea what I could check?
-have power at solenoid switch
-I did replace coolant temp sensor
Thank you for any suggestions!
Engine fan not coming on
Discussion in 'Experienced Truckers' Advice' started by RepoweredRookie, Jul 13, 2024.
Page 1 of 2
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Fan shouldn't come on till 210-212*
Bean Jr., exhausted379, BoxCarKidd and 6 others Thank this. -
Mine have always come on around 210
My normal operating temp is 181-183Bean Jr., blairandgretchen, Suspect Zero and 1 other person Thank this. -
Bean Jr., Suspect Zero, Big Road Skateboard and 1 other person Thank this.
-
Bean Jr., Concorde, Suspect Zero and 1 other person Thank this.
-
Fan on temp will not change with lower thermostats. It is set in the ECM by Detroit. I don't even think you can change fan on temp, just duration.
exhausted379, RepoweredRookie and Concorde Thank this. -
RepoweredRookie and Concorde Thank this.
-
215 is what I've been seeing in cat, Cummins, and paccar. And the newer detroits.
RepoweredRookie, BoxCarKidd and Concorde Thank this. -
180?!??! That's around what your truck is supposed to run at. I thought the fan came on at 220, but to be fair it's been a while since I've been in a Cascadia.
RepoweredRookie and Concorde Thank this. -
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 1 of 2