Fire stick 2, cobra Ltd 29

Discussion in 'CB Radio Forum' started by bburgess230, Jun 27, 2019.

  1. bburgess230

    bburgess230 Bobtail Member

    1
    0
    Jun 13, 2019
    0
    Just bought cobra Ltd and Firestik, mounted to tool box but get antenna red light when mic pressed. Tried grounding, nothing changes, I unhooked antenna from mount and held in my hand and light goes away. What gives? Calibrated according to instructions.
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Dan1918A2

    Dan1918A2 Bobtail Member

    14
    17
    Sep 24, 2010
    Peachtree City, Georgia
    0
    Do you have decent SWR readings? The SWR meter on the 29 isn’t the best, but it should work well enough. Your red antenna light is likely because your antenna is either too short or too long. My 29 with a Wilson 2000 antenna showed a red light until I properly tuned it by shortening the whip just a little at a time.
     
  4. GypsyWanderlust

    GypsyWanderlust Medium Load Member

    386
    568
    Jan 1, 2018
    0
    As Dan said, your SWR is probably too high. Look in your radio manual for instructions on tuning. Hopefully you have the adjustable tip Firesticks as it is easier. If you have the kind that must be trimmed just take it slow 1/4 in at a time or less when you get close to optimal SWR.

    Here is one of the many sites with tuning instructions: Tuning your Antenna, How to set the SWR - www.WalcottRadio.com
     
  5. Ridgeline

    Ridgeline Road Train Member

    22,640
    120,716
    Dec 18, 2011
    Michigan
    0
    Wait wait wait ....


    Before you tune anything, please describe what you mean by grounding?
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.