Thermo king SB210

Discussion in 'Refrigerated Trucking Forum' started by bluerhino, Jun 23, 2020.

  1. bluerhino

    bluerhino Light Load Member

    61
    2
    Mar 10, 2013
    0
    Ok will do that. But the ball is at the bottom of the sightglass is that ok
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. reeferwrencher

    reeferwrencher Light Load Member

    105
    80
    Aug 4, 2018
    0
    Let it cool down to about 32f,make sure it;s running on high speed cool and check if the ball is floating,if it is then it's ok,if not then it's likely low again.
     
  4. bluerhino

    bluerhino Light Load Member

    61
    2
    Mar 10, 2013
    0
    There reefer reached 34 but the ball on the sightglass sitting at bottom
     
  5. reeferwrencher

    reeferwrencher Light Load Member

    105
    80
    Aug 4, 2018
    0
    Is it running on high speed?
     
  6. bluerhino

    bluerhino Light Load Member

    61
    2
    Mar 10, 2013
    0
    Thanks reeferwrencher for your concern really appreciate. Just turned reefer on running high ball sitting at bottom of sightglass
     
  7. reeferwrencher

    reeferwrencher Light Load Member

    105
    80
    Aug 4, 2018
    0
    Ok its low again how long since you did the compressor seal?
     
  8. bluerhino

    bluerhino Light Load Member

    61
    2
    Mar 10, 2013
    0
    Did mid April 20. Iam right now with the shop that did the seal after looking for leak finally found one inside the trailer one of the cooper pipe had a leak i was inside the trailer with the technician and so where the leak is coming from i hope no more issues down the road
     
  9. bluerhino

    bluerhino Light Load Member

    61
    2
    Mar 10, 2013
    0
    Sorry I forgot to mention i had 8lbs of freon instead of 13lbs
     
  10. reeferwrencher

    reeferwrencher Light Load Member

    105
    80
    Aug 4, 2018
    0
    Yeah,thats probably where it was leaking when they did the compressor seal,but not much you can do about it now.Good luck.
     
  11. bluerhino

    bluerhino Light Load Member

    61
    2
    Mar 10, 2013
    0
    You are right i learn something next time if there any issue with truck or reefer is to stay at the shop or go back to make that any major job you witness that they have dismantled the said problem then you can proceed and go wherever you want
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  • Draft saved Draft deleted