USA self dispatch

Discussion in 'USA Truck' started by bigdad7, Jun 2, 2017.

  1. bigdad7

    bigdad7 Road Train Member

    1,249
    565
    Jun 6, 2010
    ks
    0
    Looks like I start Monday taking my truck to get restickered and do thier orientation
    Any one else here heading to the orientation on June fifth in Van Buren
     
  2. tazman74

    tazman74 Light Load Member

    251
    116
    Feb 27, 2013
    Prior Lake, MN
    0
    I was there last mont Great company if your from Minnesota do NOT expect to get home or back out (I found out the hard way) 250-300 mile deadheads.
     
  3. danny23tx

    danny23tx Medium Load Member

    371
    303
    Feb 16, 2016
    0
  4. bigdad7

    bigdad7 Road Train Member

    1,249
    565
    Jun 6, 2010
    ks
    0
    On my third week so far so good ...fair amount of frieght on the board ...
    Rates better than I saw at interstate and loving the free tolls , cat scales and base plated
     
    danny23tx Thanks this.
  5. danny23tx

    danny23tx Medium Load Member

    371
    303
    Feb 16, 2016
    0
    Thx for the update. Glad you enjoy it there.
     
  6. bj mccabe

    bj mccabe Bobtail Member

    26
    6
    Jun 27, 2017
    0
    Good afternoon. I wanted to know if the line haul pay shown in the "Driver Hub" app is the 68%, or do you have to do the math and subtract from what's shown?
    What is the average cpm breakdown on 400-600 mi loads that your seeing on the load board, not including your dead head?
    I'm asking because they've sent me the YouTube video, and the Peachtree City, GA to McGregor, TX load in the video shows a line haul of $1,097... So 68% would be $746, which is $.88cpm. Granted it's a 846mi load, which may pay a bit less, but is this actually the case with the line haul amount displayed in the app? and what 400-600mi loads average in actual line haul pay?
     
  7. bigdad7

    bigdad7 Road Train Member

    1,249
    565
    Jun 6, 2010
    ks
    0
    It fluctuates a lot to be honest ..
    I have been in the 1.40 to 1.50 range including deadhead ....the rate in dh is the whole rate so multiply by .68 and add back in fsc ....I don,t think they want us discussing specific load rates but I have not gone into tx yet for under 2.20 yet I did pull out of Houston to philly for 3200 and have two loads stacked on me to get to ky
     
    bj mccabe Thanks this.
  8. bigdad7

    bigdad7 Road Train Member

    1,249
    565
    Jun 6, 2010
    ks
    0
    First three weeks in total revenue 10897 on 8100 miles so right at 1.34 a mile that's all empty and loaded miles
    ...I am still getting a feel for how thier network flows so I hope I can improve on that a bit
     
    bj mccabe Thanks this.
  9. bj mccabe

    bj mccabe Bobtail Member

    26
    6
    Jun 27, 2017
    0
    thanks, I'm trying to compare them to Celadon which has a load board app also.
     
    Short Fuse EOD Thanks this.
  10. bj mccabe

    bj mccabe Bobtail Member

    26
    6
    Jun 27, 2017
    0
    is that your net for the 3 weeks?
     
  • Draft saved Draft deleted