What if it Snows?
Discussion in 'Questions From New Drivers' started by Dave_in_AZ, Mar 19, 2018.
Page 8961 of 23262
-
Rideandrepair, LoSt_AgAiN, lovesthedrive and 2 others Thank this.
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Rideandrepair, Opus, LoSt_AgAiN and 4 others Thank this.
-
Rideandrepair, LoSt_AgAiN, lovesthedrive and 3 others Thank this.
-
Lumper fee was $0.00172 per carrot. The worst part about the delivery by was the count. It took them about 11 hours to get the count straight. I think they lost count in the middle of the first go round so had to restart.
Rideandrepair, Speed_Drums, dwells40 and 8 others Thank this. -
@Dave_in_AZ I got an electrical question...
So ive been thinlimg about my future shop. It will require 3-Phase electrical service to power some machine tools (mill and lathe). From my understanding, if one has 3-Phase power one can pull Single-Phase power from that to power regular electrical item.
My question is, is it possible to have 3-Phase service into the Shop and pull a single-Phase line from the Shop to supply power to the house? This way I only have one meter and one electric bill. How difficult is this to do???Rideandrepair, Dale thompson, dwells40 and 4 others Thank this. -
Rideandrepair, Dale thompson, MACK E-6 and 3 others Thank this.
-
Also probably want to charge you for cost of bringing the 3 phase from its now available point down/up/across to your need point.
In Tupelo, city had a nice add on to bring it a few blocks when Clark Equipment moved in to a new building. And all we had on 3 was an air compressor.Rideandrepair, Dale thompson, LoSt_AgAiN and 4 others Thank this. -
Rideandrepair, Dale thompson, dwells40 and 3 others Thank this.
-
The only place you may get hung up is if you're utility company will allow the shop to count as the metered structure or dwelling.
3 phase is primarily for commercial purposes.
So I'd start with your utility company and go from there, or ask a local electrical contractor, cause every place has their own little set of local rules.
If you're not going to use the shop a whole lot, they make phase converters.
That will turn single phase into 3 phase. They are horribly inefficient though, and will suck a ton of power.
3 phase primary would be best. Than you just sub feed the house panel with 2 hots.InTooDeep, Wasted Thyme, Rideandrepair and 8 others Thank this. -
Rideandrepair, D.Tibbitt, Dale thompson and 5 others Thank this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 8961 of 23262