Someone tell me where the fuse is located for this evil thing...or tell me how to pop it off so the lens can be covered. For science.
Lane departure
Discussion in 'Prime' started by SavvyRed, Aug 29, 2016.
Page 1 of 4
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Trying to tamper safety device on a company's truck? It's annoying I know
darthanubis Thanks this. -
What do you have? A Mobileye on the windshield ?
-
I'm unsure. I apologize. It's a gray cube, cord running from the top.
-
If you were to paint solid black paint in front of the mobile eye would that work? then just scrape the paint off before you get into the terminal.
-
I've heard that works. I'm thinking gorilla tape that I apply and reapply. I've heard people popping them off and putting a black slip of paper in there so the terminal guys don't see it. I just can't get it off.
-
I'd consider black electrical tape before gorilla tape. Will leave less residue in case anyone looks at it. Or, if you can find it, black painters tape.
This is all for science of courseSavvyRed Thanks this. -
I had another guy tell me he just pop the speaker up and put paper towels around the speaker so it doesn't make a noise.
-
That one guy on the CB was looking for his black painties, that might help
-
What about wearing one of those noise cancelling gaming headsets? Easier to take it off when approaching a terminal
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 1 of 4