Instant O/O and Load boards

Yeah he did. So much so, Luvmyhubby had to edit my post. I've never had to have one of my posts edited.

 

I feel your pain!

 

Yeah, you've been there and back. Hopefully you've had some luck with your transmission. I just have regular ten speed, can't kill them I've tried. Don't know much about Super 10.

 

You figured anything out? Can anyone help?

 

I think It's the shift fork. some how bent and only hitting a few gears on the shift rail.you have to pull top plate off trans and replace.this sucks and I feel very bad about the mess your in. why can't you break down in FL.

 

drop the trailer. put it in one of the gears that works, Rev the piss out of the mtor and slip the clutch to get moving. Bobtail you should be able to get moving in one of those gears

 

That's what I would do... lower the truck air bags to help get out from under the trailer. If you don't have a dump valve, un-hook the leveling valve rod to let the air out of the bags. Just don't forget to hook it back up before driving down the road.

 

I was thinking the same thing, I wasc also thinking of the days when you needed to do that, but in a cab over, so much easier.

 

Just peeping straight 10 tranny's on Ebay. Prices ranging from $1400 used to $3k rebuilt. Course, that does you no good where you are now.

Just need to get that tractor (and load) where they need to go right now. I cant help but to think the folks who sold you that tractor are laughing all the way to the bank.