I have a weird one
driving down the road noticed my turn signal blinkers stopped working, no blinker light on the dash, trailer or truck, 4 way doesn’t work as well.
then it would start working normally then stop working, it kept doing that all day yesterday and then today it just stopped working any ideas of where I should start
2003 kenworth w900
2003 kenworth no turn signal
Discussion in 'Heavy Duty Diesel Truck Mechanics Forum' started by Adamali21, Sep 13, 2021.
Page 1 of 2
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Sounds like you aren't getting power to the switch, or the switch itself has failed.
-
I am heading to kenworth I will start by changing the switch first, I don’t know if there’s a relay because I don’t see one on the fuse panel
-
Replace your flasher. Thats what happens when they go bad.
-
Does anyone know where that flasher is located
It’s not on the fuse panel -
Yea, that too. I'm used to newer trucks with modules that control the turn signals....hahaAdamali21 Thanks this.
-
So I got to the KW dealer changed out my turn signal switch and flasher. Hope it does the job.
-
So once I stop at the dealer the turn signal started working randomly, after changing those two parts and I started heading down the road the turn signal stopped working again
now I am clueless -
I know it's after the fact but for future reference the flasher is located in the dash behind the ingnition switch if you remove the small rectangular dash panel bearing the Ingnition switch on the left side of the steering wheelAdamali21 Thanks this.
-
I thank your fuses are in front of your clutch pedal. If so look closely at the connectors in the block.
Adamali21 Thanks this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 1 of 2