Check out my tarp rack!
Discussion in 'Flatbed Trucking Forum' started by God prefers Diesels, Oct 1, 2021.
Page 4 of 5
-
Vampire, PoleCrusher, cke and 1 other person Thank this.
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
It auto detects the spool gun.Vampire, shooter19802003, PoleCrusher and 1 other person Thank this.
-
I also only ran it on 110. But it melted 10 gauge no problem.Vampire, shooter19802003, PoleCrusher and 2 others Thank this. -
Looks good. Nice work
Vampire, PoleCrusher, God prefers Diesels and 2 others Thank this. -
That looks great! How much to build me one?Vampire, shooter19802003, God prefers Diesels and 1 other person Thank this.
-
Yeah, it does.
Ive run into issues with putting tarps on top of a pile of chains and the chains rubbing holes in the tarp. Chain links are quite round and "soft" looking, but still...
I can't imagine what the sharp edges of expanded mesh will do.Vampire, Ruthless and God prefers Diesels Thank this. -
Too much!! I barely made it through this one.
This expanded steel is flat, and the edges are chamfered. But I'll still keep an eye on it. Worst case, I'll get some carriage bolts, fender washers, and some mudflaps, and bolt them in along the bottom. -
you will also need to swap polarity when going from shielded wired, to using shielding gas.
Vampire, shooter19802003 and God prefers Diesels Thank this. -
True. On this particular machine, it will actually tell you to do it. You tell what wire you're using, and it will say to swap polarity, and even show a digital picture of what to do. It's got an LCD screen in the front. Pretty bad ### machine really.Vampire, shooter19802003 and Tug Toy Thank this.
-
I have to say. Everyone should appreciate a nice "rack."
Vampire, shooter19802003 and God prefers Diesels Thank this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 4 of 5