Speed limiter mandate - despite all the push back

Discussion in 'Experienced Truckers' Advice' started by blairandgretchen, Oct 19, 2022.

  1. abyliks

    abyliks Road Train Member

    3,892
    9,102
    May 2, 2010
    ludlow MA
    0
    most of the morons can’t keep right now as it is, doesn’t matter if you are wide open or not, you still aren’t going to be able to go anywhere on a majority of the highways
     
    cke, MartinFromBC, Grumppy and 3 others Thank this.
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. kranky1

    kranky1 Road Train Member

    2,253
    8,854
    Sep 16, 2015
    Ontario, Canada
    0
    Anyone who runs into Onterrible or Quebec could have told you that 5yrs ago.
     
    Blue jeans, bzinger, cke and 4 others Thank this.
  4. Oxbow

    Oxbow Road Train Member

    12,839
    133,043
    Nov 24, 2015
    Idaho
    0
    We have a lot of rural highways here though that you might go 10 miles or more without seeing another vehicle.
     
  5. haycarter

    haycarter Road Train Member

    1,920
    5,317
    Jun 9, 2012
    Australia
    0
    You Don't need to hack the Computer.......!!

    Just fit a Modified Pulse Wheel at the back of the Transmission...;)
     
  6. Sapphire_Glitter

    Sapphire_Glitter Light Load Member

    197
    55
    Oct 16, 2021
    0
    Do not pass go do not collect $200
     
  7. MACK E-6

    MACK E-6 Moderator Staff Member

    48,971
    227,129
    Sep 19, 2005
    Baltimore, MD
    0
    That would be an ex post facto law and I suspect it would never survive a challenge, assuming a lawyer exists who would make that challenge.
     
  8. JolliRoger

    JolliRoger Road Train Member

    17,016
    140,798
    May 8, 2007
    Mississippi
    0
    How many you want done, and will need the makes and models before hand. ;););)
     
  9. MACK E-6

    MACK E-6 Moderator Staff Member

    48,971
    227,129
    Sep 19, 2005
    Baltimore, MD
    0
    It isn’t intended to solve problems. The whole point is to forcibly dumb everybody else down to the level of the members of the ATA and all their Turdcadia drivers that go 10 mph under the speed limit in the middle lane on roads where trucks aren’t allowed in the left lane.
     
  10. Grumppy

    Grumppy Trucker Forum STAFF Staff Member

    3,089
    10,595
    Dec 11, 2010
    West Monroe, La
    0
    I think we should intentionally clog everything up. It wouldn't take everyone to participate (although everyone would... intentionally or not), just a few along the road every 100 miles or so. Eventually, it'd be clogged up from New Mexico to New Jersey.
    It wouldn't take many cause the situation itself is going to produce most of the problem. A few agitators along the way &............ well, you know.
     
    Blue jeans, Aamcotrans, cke and 7 others Thank this.
  11. kemosabi49

    kemosabi49 Trucker Forum STAFF Staff Member

    10,666
    45,742
    Jan 13, 2013
    SW Arkansas
    0
    The FHWA has been trying to get the FMCSA to require speed limiters for years. Between them, the ATA and the safety nazis the Feds finally acted.
    The whole comment period was just a show as we all know. The FMCSA had probably already written the final rule before even asking for comments.
    The speeds that they mentioned were 60 mph, 62 mph, 65 mph and 68 mph. 68 ain't gonna happen. The ATA wants 65 and the safety groups and Teamsters want 60. Since the ATA spends the most of lobbying they will get their wish.
    The outcry from the general motoring public will be because the now slower trucks are taking even longer to pass than now and are slowing them down too much.
    Probably be the summer of 2024 before it starts but maybe sooner.
     
    Blue jeans, snowman1980, cke and 6 others Thank this.
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.