Today's CB Shops

A couple of reputable shops that come to my mind are Bells CB.

Stryker SR-955HPC V2

And CB World.

SR955HPC - Stryker 10 Meter 60+ Watt PEP Amateur Ham Radio with SSB

Screw driver at Bells has several videos showing his work. I'm not sure about the techs at CB World, although I've bought some antennas from them, and their customer service was top notch.

 

What type of work needs to be done? If any tuning is involved, performance will always be worse after the work is done. Negating any value in money spent.

 

Virtually anybody can solder a couple wires.
I wouldn't be too selective about who replaces a meter light. I would just go to the most convenient location for something like that.

 

It's hard for me to recommend any export radio with a factory alignment due to the mismatched mosfet finals. Any single final radio should perform quite well, but that pretty much narrows it down to an HR2510 or a type-accepted cb radio. Any ham radio with Mars mod would be a decent option.

 

If your looking for a service manual tune,Rick in Gary,In at the ta is about the best shop out here.Shops called Overclocked Electronics.