DD16 starter cutting out

Discussion in 'Heavy Duty Diesel Truck Mechanics Forum' started by westernone, Aug 17, 2023.

  1. westernone

    westernone Bobtail Member

    2
    0
    Aug 17, 2023
    0
    I have a 2021 Western Star 4900 with a DD16, and the starter will engage for about half a second before it cuts out. The key is still in "engine start" position (engine is not running at this point). This will happen 4 out of every 5 times I try to start the truck. All the inputs and outputs seem to be fine, I've installed a new starter, I've put in my spare ECU to test, and the problem persists. Im running out of ideas. Has anybody come across this before?
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Jesh574

    Jesh574 Bobtail Member

    8
    6
    Jul 26, 2023
    Alaska
    0
    What transmission do you have? Is this setting any codes?
     
  4. westernone

    westernone Bobtail Member

    2
    0
    Aug 17, 2023
    0
    It has an Eaton 18Spd. No codes.
     
  5. SmallPackage

    SmallPackage Road Train Member

    5,704
    18,231
    Dec 20, 2019
    Marion Texas
    0
    Could be a bad ground cable connection. Every starter needs a good independent ground strap to the truck frame to work. Check that connection. May be loose or corroded. It doesn’t take much to cause starter to go dead when it draws all those cca’s from the batteries.
     
  6. little cat 500

    little cat 500 Road Train Member

    2,055
    1,100
    Jan 17, 2010
    Abbottstown PA
    0
    switch on the clutch pedal maybe
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.