Getting vibration unde cab. Change leveler early this summer already. Noticed vibration last few months. Wanna start there.
Ride height for 06 freightliner classic xl
Discussion in 'Ask An Owner Operator' started by aceman18, Dec 3, 2023.
Page 1 of 2
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
If you can't find that actual measurement, try 2" showing on the bell. Most trucks I've driven it seems that's where the bags run, with some a touch higher, say an inch. At least that gives you a ball park to see where you're at.Rideandrepair Thanks this.
-
Did you check the u joints and the transmission yokes first?Rideandrepair Thanks this.
-
Google will give you the answer.
Dennixx and Rideandrepair Thank this. -
I'll give that a try. Thanks driver!Rideandrepair Thanks this.
-
Yup. When I greased the truck about a month and a half ago.Rideandrepair Thanks this.
-
Yup. Couldn't find that, that's why I'm here and have you guys. Thank you!Rideandrepair Thanks this.
-
-
Nope. Brand new back in July.Rideandrepair and 77fib77 Thank this.
-
So, tractor leveling valve, carrier bearing. Are transmission bolts all in there? Peeps have cited that before.
I had an issue with engagement of 9th and 10th gear. After it was hot with a ten speed.
But I hauled liquids smooth bore after 220k of that on top of the first 200k of not, well I had drive line issues. Reman trans cleaned it up. But I was also told some times it could be just the clutch wearing weird from the surge. But this is speculation, except for it got cleaned up. Oh the top box was fine.
Anyway take it to a good drive line shop would be and end game check. I dont know of a good one.Rideandrepair Thanks this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 1 of 2