I’ve played with them a couple times, but on a spring ride truck and not quite as big as yours. These were small enough to where you could attach the hook to a cable in the back of the trailer.
Big Loads - Post Photos Number 2
Discussion in 'Heavy Haul Trucking Forum' started by truckdad, Aug 3, 2015.
Page 873 of 957
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
“I’m about as brave as your pockets are deep”
If I never get to move another one I’ll be just fine with that.Left Lane Wayne, kylefitzy, W923 and 12 others Thank this. -
nothing to special just a nice day outFerrissWheel, Ruthless, beastr123 and 6 others Thank this. -
Any thoughts on fenders over the back drive tires
This set seems to pickup rocks really bad
I don’t think I can get them high enough to clear the suspension travel and still miss the trailer when I put it down…thinking about putting it on the trailer itself but just don’t care for the look of that and it only works when the trailer is onFerrissWheel, CAXPT, Deere hunter and 1 other person Thank this. -
Don't they sell a set of the black double humpers that attaches to your axles instead of frame?FerrissWheel, CAXPT, W923 and 1 other person Thank this.
-
Minimizer plastic fenders. Had them for the last 9 years now. They even come in chrome if you really want.
I've dropped trailers on them many times and nothing more than a couple scuffs. I've also ripped a couple off by running over my mudflaps since they are attached to my rear fenders. The brackets snap off with no damage to the actual fender. $35 for each bracket tonput them back on. I just keep a couple spares under the bunk.
When I mount them I drop the bags and use a 1/2" board as a spacer on top of the tires. Set the fender on that and then line up the brackets.
The tops of the fenders are just slightly above the frame rails but they are far enough forward that the trailer rides up my ramps before coming even close to touching.
FerrissWheel, cke, dwells40 and 7 others Thank this. -
Check out these guys. Semi Fenders for Big Trucks, Poly Dumpster Lids | Robmar Plastics good fenders pretty cheapFerrissWheel, cke, IH9300SBA and 5 others Thank this.
-
Here's a better picture. It's hard to see them in the light but I have a small set of ramps on top of the frame that rise right with the rear edge of the fenders. Even a flat nose trailer without rollers would ride up them. They are just slightly taller than the top of the fenders.
FerrissWheel, cke, Feedman and 4 others Thank this. -
+1 for these. I put a set on my single axle back in the spring. I used the adjustable brackets.FerrissWheel, cke, IH9300SBA and 4 others Thank this.
-
I will look into that and even if they don’t I’m quite sure I can arrange that…might be tough keeping it together though when those axes get hammered on a washboard road it can get pretty violent.FerrissWheel, cke, Feedman and 2 others Thank this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 873 of 957