Where is everyone #5

It’s amazing the attachments you can get for a bobcat now.

 

It’s also amazing the size of skid steers now. They have pretty much made small dozers obsolete. Mine is only 45hp. Now they are well over 100 horse and I heard rumors someone is about to come out with 150 horse. Maybe even already have.

 

A concrete milling attachment, cuts up to about 18 inches wide? Company here in Tupelo had one in around 92. Cut concrete floor trenches for installing drag chain conveyers in the furniture industry. Made out like gangbusters for several years. Beat jackhammer and bust out all to ...
Had a water dripper to keep the dust down. Noisy, and teeth did not last long, but...

like this...
Mini Excavator Cold Planer

 

My back hoe is 3 pt hitch type. It’ll scoop the #### outta soup. But piled dirt and harder it’s more aggravation than it’s worth. Let me also say that I’m no operator of any sort.

 

Backhoe, trencher, mini ex, whatever.

I say we dig it with dynamite

 

As soft as your ground is just use a tractor supply bucket

 

With that old 50% DuPont Ditching; in the nice wooden, case with mitered joints. Would like to have one of the cases, EMPTY THO...
Hard to make it go straight down the ditch line, less you might use one of these heavy things they skid down in the trench to keep landslides from killing the hands.... Fun to misjudge the fuse burn rate and begin to wonder if you pulled it out of the det while pushing it down the hole.
Then exactly when you are sure you messed up and start to walk back toward it.. Ka ..BL.. AM .. and dirt clods hit you...
Blowing ditch bank stumps at <18 year old.

 

i herd them 3point hitch jobs were hard on your tractor , cracking stuff on rearend . Theys a newer type that fits into an underslung frame , supports betterer.

 

Done enough mainline irrigation trenches in my time at the golf course.. ill gladly sit back and watch someone else do it

 

Got the slick disk installed… still a little grease on there but it will work itself off.