I messed up. Over on Drives by 2K gross is 75K

You won’t see a scale until you get to Bolingbrook on I-55. Depending on where you’re going in Chicago, you can probably run around that scale fairly easily.

 

Stay on I-72 E to spfld il, it’ll dump you onto I-55 North, no scale houses until you get up into Chicago. When you get to I-80, if you need to continue on 55 further north, jump off on I 80 east to I-355 north and take that up to I-55 north again. That’ll put you north of the north bound scalehouse if it’s even open. FYI I-355 is a toll rd.

 

Always try to scale within 20 miles of your pickup if possible...obviously that was possible in this case..lesson learned.. @Speedy356 gave you the correct advice at this point.. Chicago land scales are mostly closed so you go lucky.. All The Best!

 

To my knowledge, none of the toll roads in the Chicagoland area have a scalehouse.

 

There’s north and southbound scales at Bolingbrook, and east and westbound scales at Joliet on I-80, but they are farther east on 80 if you want to run up I-355

 

I used Truckers Path a lot to see where the scale houses were and if they were open or closed. Very useful tool.

 

Do you have a suspension gauge?