What to do to make my c-15 a little faster?
Discussion in 'Trucks [ Eighteen Wheelers ]' started by ronnyenns, Jul 4, 2010.
Page 6 of 7
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
yeah I'm having a hard time sleeping waiting on mine to come back. T800H what setting did you bump yours up to? I just went with the modest 550/1850 tune being its a 10spd & I'm not the only one to run the truck so gotta play it safe for the other 1% of the time I'm not the one in the drivers seat.
Thanks for the Quick turn around and taking the time to explain all my options Mr Haney. -
Truck Farmer I got the 600 hp Brake Saver, you will be happy with the 550 I had that on the loaner Mr Haney sent me and it was day and night difference, coming from an original 475 hp that was putting out 500 hp and always felt strong until I tryed that 550, the motor really woke up and it ran lot smoother across all rpm, you will be safe, also you have to remind the driver to watch the speedometer or use the cruise a lot because it run so easy that you would not notice your going 20 or 25 mph faster than you wanted to, and that is where I think the fuel saving will come, because the engine doesn't have to work nearly as hard, I have only driven mine for a day and I'm happy, but I'm sure I will like it more with the time.Eddy
-
Mr Haney how do I get a hold of you I am interested in such a custom tune I also pull 300,000 plus . Thanks in advance
-
^^^^^^^^^^ PM sent
-
Well all I can say is I'm very happy so far with my new tune from PDI I gained power uphill and gained .4 mpg so I get 5.5 mpg now, is that good or bad? That was hauling a 48 ft van weighting 60.000 lbs.
Mr haney you Also mentioned about the fuel temp wire, should i do it or will I loose mpg? If yes, do you just unplug the sensor and put a resistor in it or leave the sensor plugged and put a resistor between? -
Where did you find one? I have been looking but can't find one that goes to a high enough psi.
Also, I was on Bully dog's website and it says something about uploading a program from Caterpillar? What's that all about??? -
-
-
Bump......ronnyenns said: ↑Well all I can say is I'm very happy so far with my new tune from PDI I gained power uphill and gained .4 mpg so I get 5.5 mpg now, is that good or bad? That was hauling a 48 ft van weighting 60.000 lbs.
Mr haney you Also mentioned about the fuel temp wire, should i do it or will I loose mpg? If yes, do you just unplug the sensor and put a resistor in it or leave the sensor plugged and put a resistor between?Click to expand...
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 6 of 7
Related Categories
-
TSBs search for newer Cascadia
skoontz posted Feb 13, 2026 at 1:00 PM -
DD15 Oil Suction Manifold...
Flatbed4Ever posted Feb 12, 2026 at 8:13 AM -
1994 Kenworth t800 headliner...
Mr79W900A posted Feb 11, 2026 at 12:12 PM -
N14 Boost pressure
Notiller12 posted Feb 10, 2026 at 7:39 PM -
Headliner removal screw locations
Mr79W900A posted Feb 10, 2026 at 12:17 PM -
S13 Engines Good or Bad
istumped posted Feb 9, 2026 at 10:37 PM -
Parking brake slow to engage
1Logger1 posted Feb 7, 2026 -
Cascadia Classic Herd Bumper on...
importvic posted Feb 7, 2026 -
Repairing steel a/c line
Dwight Goertzen posted Feb 7, 2026 -
First Truck Project - 362. Need...
Seafordguy posted Feb 7, 2026
Loading...
Recent Threads
-
I84 Oregon bridge restriction
mitmaks posted Feb 14, 2026 at 6:37 AM -
Best company to sponsor CDL...
ConsciousTrucker posted Feb 14, 2026 at 5:27 AM -
2 Preventables & termination
rotro13 posted Feb 14, 2026 at 2:04 AM -
Comdata
Olec posted Feb 13, 2026 at 10:36 PM -
Cascadia Life,70 FEET Above Ground
mjd4277 posted Feb 13, 2026 at 5:46 PM -
Has anyone seen GMs private...
Otr Traveler posted Feb 13, 2026 at 4:50 PM -
TSBs search for newer Cascadia
skoontz posted Feb 13, 2026 at 1:00 PM -
Just passed a year experience....
lonewolfgringo posted Feb 13, 2026 at 6:39 AM -
New final rule from FMCSA...
drvrtech77 posted Feb 13, 2026 at 1:39 AM -
Hooking up ramps to the side of...
mitmaks posted Feb 12, 2026 at 9:34 PM
Loading...