Timing Marks Cummins ISX

damper i think dont quite remember

 

the mark is in the dumper (in the driver side) you can see ABC in the front cover your going to see an arrow behind to the A (insert pin) right now your going to look on top that the valves are loose ,right there is #1 piston (if its tight check #6 you need to make another round (you can start at the 6 too),when you are ready it calibrates intake 14 Exhaust 27 injector cali .71 lbs a torque 3/8 of clock(NO CLICK), tight an loose the new cali 71 lbs,, jake break 276 gage (tool especial) because it 1/4 inch, A1 ,B5, C3 ,A6, B2 ,C4 i hope this help

 

are you tring to set timing or adjust you valves?

 

if you are setting cam shaft .you really need the special tool

 

Hook up the timing light to the #1 spark plug.... and call me in the morning!

 

What a joker you are...

 

Thanks......

 

what angle do you set the cams at ? 4 and 6? some ppl are saying 4.5 or 5, have you heard of this? TY

 

the wedge #s are on the engine data tag