Truckers Report Jobs

Find Trucking Jobs

Company Driver Company Driver Dry Van Dry Van Flatbed Flatbed Refrigerated Refrigerated Specialized Specialized Owner Operator Owner Operator
More Trucking Job Searches ⌄ Fewer Trucking Job Searches
⌃

c15 oil filter base

Discussion in 'Trucks [ Eighteen Wheelers ]' started by kalh7, Oct 8, 2010.

  1. Oct 8, 2010 #1
    kalh7

    kalh7 Light Load Member

    186
    62
    Mar 28, 2007
    southern illinois
    0
    was wondering if someone could explain what is all involved on taking the oil filter base off of a bxs c15. was changing oil in it and now i cant get new oil filter on, tried putting old filter back and it wouldnt go all the way either. so im sure the threads on the base are messed up so im assuming the entire base has to be replaced to fix it. thanks in advance.
     
    kalh7, Oct 8, 2010
    kalh7, Oct 8, 2010
    #1
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Oct 8, 2010 #2
    kalh7

    kalh7 Light Load Member

    186
    62
    Mar 28, 2007
    southern illinois
    0
    well to add some more information and questions. i ordered the stud for the filter just in case but i was wondering if the stud had some kind of non-threaded part to stop the filter threads since the filter has no non-threaded part. was discussing with someone and that came up, thinking maybe the stud loosened a little bit.
     
    kalh7, Oct 8, 2010
    kalh7, Oct 8, 2010
    #2
  4. Oct 10, 2010 #3
    Mr. Haney

    Mr. Haney Road Train Member

    2,693
    2,041
    Dec 17, 2008
    0
    If the threads are damaged on the hollow stud the filter screws to, you can replace the stud instead of the whole oil filter base. The part number for the hollow stud should be 2P-4304, but you'll need to confirm that with your particular engine serial number.
     
    Mr. Haney, Oct 10, 2010
    Mr. Haney, Oct 10, 2010
    #3
  5. Oct 10, 2010 #4
    kalh7

    kalh7 Light Load Member

    186
    62
    Mar 28, 2007
    southern illinois
    0
    do you happen to know how to get that stud out?
     
    kalh7, Oct 10, 2010
    kalh7, Oct 10, 2010
    #4
  7. Oct 10, 2010 #5
    JohnP3

    JohnP3 Road Train Member

    1,594
    684
    Feb 21, 2010
    Rock Creek B.C. Canada
    0
    To get the stud out what I do is put a pair of vise grips, tight on the side, of the stud, then put on a, I use a Snap-on belt wrench, and take it out. the manual says to tighten to 60 lbs with thread locker on it.
     
    JohnP3, Oct 10, 2010
    JohnP3, Oct 10, 2010
    #5
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.