Cruise Control problem

Try putting your foot under the clutch pedal and lifting the pedal ...then engage the cruise. If this works then you probably have a return spring or something that needs fixed or adjusted. Does the engine brake work when the cruise is out?

 

i had the same thing on shakers---if my memory works--cycle the cruise on and off switch----i think that is what i had to do after stopping

 

And the break micro switch will do the same thing....

 

All my Shakers had this problem (14 in 2 years). Here's what worked for me.

As I hit the off ramp, turn OFF the CC (not just disengage). Park, do my thing (potty break, unload, whatever). When you get on the freeway, turn it on, get up to speed, re-engage.

This worked on all but one rig. That one had a bad on/off switch.

Oh and the 14/2years? The DM and Shop liked to have me shake-down rigs to find the problems....LOL.

 

Just make sure you turn off the CC before you shutdown the rig.

 

Systemic Freightliner problem ... I've had it on the Cascadia and the Coronado.

 

That fix his problem?

 

I assume the obvious solution is ....Not a choice !!!