adding a blow off valve?

Discussion in 'Trucks [ Eighteen Wheelers ]' started by thesvg, Jan 9, 2011.

  1. thesvg

    thesvg Light Load Member

    192
    13
    Dec 9, 2010
    0
    Has any one added a blow off valve to an N14 engine? the reason I ask is I want to protect the turbo as much as possible :D thanks!
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Jfaulk99

    Jfaulk99 Road Train Member

    2,914
    1,652
    May 16, 2009
    Couch
    0
    um......I'm going to go with no. What are you doing with your N14 that your causing compressor surge? Floor it and lift?:biggrin_2556:
     
  4. Pablo-UA

    Pablo-UA Road Train Member

    7,604
    1,642
    Oct 11, 2010
    Borispol, Ukraine
    0
    I've never heard about overboost problems with N14. There is no boost pressure liming valve.

    Usually overboost codes are related with faulty boost pressure sensor wiring ore faulty sensor.
     
  5. thesvg

    thesvg Light Load Member

    192
    13
    Dec 9, 2010
    0
    None of that, I just want all the preventative maintenance I can get :)
     
  6. Jfaulk99

    Jfaulk99 Road Train Member

    2,914
    1,652
    May 16, 2009
    Couch
    0
    Getting any BOV to even remotely work on an N14 would cost more than 2 turbos. I've never seen one work right on a diesel pickup and most guys who bought them did so because of severe barking issues and wouldn't buy another. The diesel versions have to be set up and tied to the throttle position sensor and hardly ever work right.


    Long story short, save your money. N14 turbos are not that expensive and usually last a long time if you keep your oil changed and clean air filters.
     
    thesvg Thanks this.
  7. Gambi80

    Gambi80 Medium Load Member

    Never heard it referred to as 'barking' before. lol

    Since I put a new CAC on my truck...now it boosts up to 40-41lbs and if I let up too quick when I shift, the turbo will 'flutter'...you know, sounds like "fooo-toooo-tooo-tooo".
     
  8. thesvg

    thesvg Light Load Member

    192
    13
    Dec 9, 2010
    0
    That's what mine does, is that normal?
     
  9. Gambi80

    Gambi80 Medium Load Member

    I think when it does that you basically have the turbo working against itself. It's normal in the sense it's just how it works. When you let off the gas, there's not enough exhaust pressure to keep the turbo spooled up and the boosted intake air has to escape. The only way for it to escape is backwards from intake manifold, thru air cooler, turbo and back out the air cleaner.

    Maybe the experts have a better explaination.
     
  10. Bent Wrench

    Bent Wrench Medium Load Member

    588
    205
    Aug 11, 2009
    Cornholio, OR
    0
    Diesels don't have a throttle butterfly that closes on boost pressure and causes a spike....

    If they did, the spike from 35# of boost at WOT would turn the I/C inside out.
     
  11. Jfaulk99

    Jfaulk99 Road Train Member

    2,914
    1,652
    May 16, 2009
    Couch
    0
    The gas guys use them to vent the boost between shifts to reduce lag, but most just buy them for the noise. Diesel's usually don't need one and are a PITA.

    I know a lot of guys with modded diesel pickups and the auto's are the worst. Automatic transmission and large single turbos will surge sometimes between shifts, or at lockup. Most just learn how to drive to minimize it. With my manual transmission I had to try to get it to do it. With twin turbos it's almost impossible.
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.