AC Outlet - Engine Noise Question

Discussion in 'Experienced Truckers' Advice' started by Capt_Gruuvy, Feb 3, 2011.

  1. Capt_Gruuvy

    Capt_Gruuvy Light Load Member

    264
    94
    Jul 29, 2010
    Middle of the Desert
    0
    I plugged my XM into the AC outlet on the dash and it works great. Then I turn the engine on and whoo hoo I get this high pitched noise through the speakers.

    Is there an alternative AC outlet that is filtered that I could possibly run from the power on top for the CB that would eliminate this noise ?

    I only want to move it up top so I don't keep bumpin' the unit with my knee.

    I have the XM snap. Dig it. It's Jiggy-licious. Just need to get rid of that sound so I can enjoy it when actually driving.

    Ideas ?
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Roadmedic

    Roadmedic Road Train Member

    18,951
    8,981
    Apr 4, 2007
    0
    Are you directly hooked into the radio or using the fm transmitter?
     
  4. Capt_Gruuvy

    Capt_Gruuvy Light Load Member

    264
    94
    Jul 29, 2010
    Middle of the Desert
    0
    Good question. I have a little wire that plugs it into the radio. I use this wire for my iPod also.
     
  5. Roadmedic

    Roadmedic Road Train Member

    18,951
    8,981
    Apr 4, 2007
    0
    That is the aux input and is considered a direct connection.

    You should not have any noise with this. Might want to see if you can find another unit to test to find whether you have a defective one.
     
  6. rambler

    rambler Road Train Member

    1,358
    582
    Nov 5, 2007
    0
    Volvo? Hit the menu on the washer stalk, scroll down to "display", hit the menu button again, on the screen that comes up hit the "black panel" option. Does the noise leave?
     
  7. Capt_Gruuvy

    Capt_Gruuvy Light Load Member

    264
    94
    Jul 29, 2010
    Middle of the Desert
    0
    It's a Freightliner.

    I get that the noise SHOULD NOT be there. I have tried telling it to leave and that did not work either.

    The noise rolls up and down with the engine level. It's dirty power in the outlet.

    I can send the signal to 88.1 .... same result. Engine noise.

    Original plan is to locate a filtered AC outlet. Any one know if this is available ?

    Would a decent CB shack have ideas ?
     
  8. rambler

    rambler Road Train Member

    1,358
    582
    Nov 5, 2007
    0
    My thought is you will probably need to buy a noise filter from the Shack or some electronic store and splice it into your AC plug feed wires. Or as suggested always a possibility of a defective unit. The Volvo thing I mentioned was because I had noise in my AM radio (yes, some people still prefer it over satellite or FM or CD's lol) and one night during fog I killed the panel lights on the dash for the better visibility and VIOLA....the high pitched whine went away. I've had to use noise filters on several other brands of trucks over the years to eliminate dirty power issues identical to what you're having now..not with sat radio though as I've only had factory radios and antenna's but with other devices.
     
  9. witchwaywest

    witchwaywest Medium Load Member

    327
    105
    Dec 8, 2007
    Monroe New York
    0
    Go to sirius/xm website.Search for "frequency finder".Type in your zip code.It should list about five different frequencies for your area for best reception.Remember as you get out of range of these frequencies you may have to find another bunch.XM makes static reducers but you'll have to pull the radio out.Simple but not portable like the snap.
     
  10. fulgrwnmn

    fulgrwnmn Light Load Member

    276
    54
    Sep 17, 2008
    whitehouse,oh
    0
    you need a noise filter or run it from the fuse block itself, my bet is the ground your using is from the engine and not the frame
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.