Wet kit question.

I'ts a Chelsea.

 

Use caution when mounting the PTO if its a direct mount pump. Use a floor jack and make sure the PTO mounts flush and the pump doesn't hit anything on the back of the trans.

 

I have used the same pto-pump from a 14--9 to a 16-10 and a 16-13 with no problems,just made sure to have the right amount of shims between the pto and the bottom of the trans.

 

Will the wet kit from a 15 speed interchange with a 13 speed

 

I'm not sure about all the information in this thread but you have to call Eaton and find out about the gear that turns that PTO.

As far as I know different Transmissions have different gears with a different number of teeth. Don't get me wrong some Transmissions have the same but it depends what model you have.

Places that sell pto's can tell you also. Online I think it's listed somewhere but off the top of my head I'm not sure where that is. Look up PTO transmission compatibility and they may even be listed on the eaton site what number of teeth is on the PTO gear.