Anyone out here having problems with Landoll 435's? My company has three of them and all three have been nightmares. We have issues of the hose track system binding and breaking and we have issues of the trailer I-beams wearing into the undercariage frame when the axles travel back and forth. Just looking for others to see if this is common.
Landoll 435
Discussion in 'Trucks [ Eighteen Wheelers ]' started by chrisd, Aug 13, 2007.
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
I've used one a lot when I was hauling heavy equipment. I've found that they are very handy. But unfortunately I never crawled under it.
-
Yeah, they are very handy. But here lately it has been in the shop more than it has been on the road.
-
I've had 613 pans, 953 track loaders, the occasional small excavator, and just about all manner of forklift and manlift up on Landoll trailers. I guess loads like that are what cause the problem you describe.
-
We have one 435B, I pull it on a daily basis. We have seen wear issues on the axle dolly against the I-beams and some binding issues during axle travel. I had it in the shop about a month ago "our own shop" and replaced the guides that keep the axle trolley aligned when moving fore / aft. they had nearly worn through and were causing it to bind on the I beam when the axles neared rearmost travel. Otherwise I've seen no issues "yet" !!
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.