Linear Amplifiers
Discussion in 'CB Radio Forum' started by PaPaBear63, Oct 19, 2011.
Page 2 of 4
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
I've seen it done with less than 5 Watts
-
You have to watch these Ham guys, they sometimes get confused as to what radios most of us drivers are talking about and drift off "frequency" real bad!!
-
Shoot, I've talked to Australia with about only 10 Watts on 38 lsb. In case you don't know, Mike, that's CB
-
Because it's a base station antenna that is for 10-40 meter ham radios.
The antenna type and height makes or breaks any radio, be it CB, ham, business band, or whatever. Base station antennas as a rule will allow you to transmit and receive farther than mobile antennas will. The higher an antenna is, the farther you can transmit and receive, provided it has a low swr. Also a beam antenna allows you to transmit and receive farther than an omni direction antenna.
However a base station antenna is not feasible on a big truck. In fact due to height restrictions, most trucks cannot run the optimal mobile CB antenna size (which is 9 ft) so they run smaller antennas. Those smaller antennas unfortunately hinder your range, and thus linear amps are used to compensate. -
Where is thepm button
-
I talked to 25 in austrailia from my suburban on chanbel 11 with only 25 bird watts
and been known to walk allover a few big base stations -
YEP nothing like a base antenna to extend range however you can't use one on a truck ....
R7 .... on RIGHTAttached Files:
-
-
I talked to 25 in austrailia from my suburban on chanbel 11 with only 25 bird watts
and been known to walk allover a few big base stations -
hehehehe...thought there would be one....all other Forums have one!

email me at jessejamesdallas@hotmail.com or pm on one of the other Forums I guess...
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 2 of 4
