Prime Flatbed Divison Info
Discussion in 'Prime' started by OpenRoadDreamer, Oct 18, 2011.
Page 26 of 141
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
I will lol
-
Seems like you guys in the FB division are happy and stay busy!! I'm thinking about calling prime to see if they would hirer me outta Orlando area. And do there schooling. Read this thread n didn't notice many of you coming to fl much. Do you guys know if have runs down here normally? I know refers use to bring a lot of meat loads to my job (lumper at sysco foodservice) but haven't seen any prime trucks in awhile
Also was Wondering that if I wanna do FB would they send me out with a refer trainer first to get some experience then switch to FB or go straight out with a FB trainer??foresaken Thanks this. -
I've delivered in Orlando once. Only time I've been in Florida was dropping Cat parts at an exporter. There are a few places we go down there. You would have to call a recruiter n ask about if their hiring out if Florida this week. I went reefer, then switched to flatbed. Helped me with a few things and I've got experience with both divisions. If you can find a flatbed instructor, don't turn him down. Bit don't turn down a reefer buy either. Backing with a reefer trailer is easier than a flat. Is rather take the test with a reefer than a flat
-
Thanks for the quick reply I plan to call a recruiter in few hours once I get home from work. Yea I talked to my dad about it yesterday he has drove reefer/vans for 25 or more years and he said probably be easier to learn on a reefer than FB since spreadaxle is lil harder to back up.
-
The problem with the spread is when you turn one axle is always being drug along the ground, not good for the tires. If your really light its not quite as big a deal. But if your heavy you can rip the tire clean off the wheel. Not a comforting feeling to with the tire bend under the trailer. Also the pivot point changes on the trailer depending on what's goin on.
-
It is and it isn't. As far as alley docking, it can be a bit tricky. Parallel parking, however, is a breeze. In a van, you can set your trailer tires in the box, but you'll still have some drift to the side while positioning your tractor. On a FB, once your trailer is in and mostly straight, you can just yank it right in. Very rarely did I have to pull up.
Turning is harder to get used to, but I drive cautiously anyway. Plenty of room to make the turns, even in busy city streets like Philly and DC.
Just drive the truck, don't let it drive you
-
Thanks for the info!! Seen you where looking for a fb trainer hopefully you found one and are on working on that seat upgrade!
And Philly sucks I had to spend 9wks there from July-september at the sysco as and order selector -
the one thing is dont like about spread axles is turning whether backing or a tight turn i always wonder if i am going to mess up the tires on the front axle majority of the time im heavy(over 40k) so i take it easy as possible when making turns and backing
-
been a while here are a few pics from my latest adventures there are more in the album on my page....pipe and rolled roofing
![[IMG]](proxy.php?image=http%3A%2F%2Fwww.thetruckersreport.com%2Ftruckingindustryforum%2Fmember-da1-albums-1-picture14878-pipe-load-at-my-90.jpg&hash=7624b229bb43bb5b9501d2368fd312ff)
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 26 of 141