Truckers Report Jobs

Find Trucking Jobs

Company Driver Company Driver Dry Van Dry Van Flatbed Flatbed Refrigerated Refrigerated Specialized Specialized Owner Operator Owner Operator
More Trucking Job Searches ⌄ Fewer Trucking Job Searches
⌃

pulling first 3 axle double drop tomorrow, any tips?

Discussion in 'Flatbed Trucking Forum' started by AZS, Jun 18, 2012.

Page 1 of 2
  1. Jun 18, 2012 #1
    AZS

    AZS Honk if anything falls off

    2,912
    1,303
    Sep 30, 2010
    PHX, AZ
    0
    going from Houston to Wilmington, CA with a 60k load. First time with one of these, anything I should be aware of besides the obvious high center issues that could arrise. The third axle is a booster if that makes any difference. Appreciate any advice.

    Edit - the neck is also removable but don't have to mess with that on this load
     
    AZS, Jun 18, 2012
    AZS, Jun 18, 2012
    #1
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Jun 18, 2012 #2
    bighaulc-15

    bighaulc-15 Light Load Member

    235
    39
    Apr 24, 2012
    new albany IN
    0
    dont turn sharp you will dig the trailer into the ground. swing wide.
     
    bighaulc-15, Jun 18, 2012
    bighaulc-15, Jun 18, 2012
    #2
  4. Jun 18, 2012 #3
    Rontonio

    Rontonio Road Train Member

    6,483
    47,860
    Aug 9, 2009
    0
    AZS,

    just make sure you are comfortable with the steps to drop the trailer on the ground and pick it up, blocking the neck and so on.

    That has been the hardest part for me since I purchased my double drop.

    don't be afraid to ask other guys questions
     
    Rontonio, Jun 18, 2012
    Rontonio, Jun 18, 2012
    #3
  5. Jun 18, 2012 #4
    Cat sdp

    Cat sdp . .

    21,279
    76,004
    Apr 8, 2012
    Orion's Belt
    0
    Watch your fuel mileage drop!
     
    Cat sdp, Jun 18, 2012
    Cat sdp, Jun 18, 2012
    #4
  7. Jun 18, 2012 #5
    AZS

    AZS Honk if anything falls off

    2,912
    1,303
    Sep 30, 2010
    PHX, AZ
    0
    Appreciate it guys.

    Rontonio - I feel I would be alright if I had to remove the neck, my company does give us this laminated instruction sheet with step by step how to do it. One thing I can't get an answer to is fifth wheel placement, I have it all the way back but seems like thats going to ride really rough.
     
    AZS, Jun 18, 2012
    AZS, Jun 18, 2012
    #5
  8. Jun 18, 2012 #6
    skateboardman

    skateboardman Road Train Member

    6,232
    5,706
    Jan 14, 2012
    flatbed heaven
    0
    leave it back ride, you talked to AT to much
     
    skateboardman, Jun 18, 2012
    skateboardman, Jun 18, 2012
    #6
  9. Jun 18, 2012 #7
    AZS

    AZS Honk if anything falls off

    2,912
    1,303
    Sep 30, 2010
    PHX, AZ
    0
    ok and no AT left before doing anything like this
     
    AZS, Jun 18, 2012
    AZS, Jun 18, 2012
    #7
  10. Jun 18, 2012 #8
    Rontonio

    Rontonio Road Train Member

    6,483
    47,860
    Aug 9, 2009
    0
    mine is set very near the rear axle as well and it can a rough ride from time to time. also it will take an acre to turn around as some pointed out

    I think you will like it, it is just a little different than your used to.plan on longer to load/unload than usual.
     
    Rontonio, Jun 18, 2012
    Rontonio, Jun 18, 2012
    #8
    AZS Thanks this.
  11. Jun 19, 2012 #9
    AZS

    AZS Honk if anything falls off

    2,912
    1,303
    Sep 30, 2010
    PHX, AZ
    0
    well the load got canceled anyway, back to a step deck. Thanks again.
     
    AZS, Jun 19, 2012
    AZS, Jun 19, 2012
    #9
  12. Jun 19, 2012 #10
    Cab Lizzard

    Cab Lizzard Light Load Member

    118
    45
    May 16, 2011
    MIA
    0
    You mean someone cut the price so you got cancelled
     
    Cab Lizzard, Jun 19, 2012
    Cab Lizzard, Jun 19, 2012
    #10
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

    • Page 1 of 2