Whats your cb and how is it specialized

E. F. Johnson Messenger 352, 352D

Bar none the best. Astatic and Telix swiped the mike switch but use poorer mike elements. Uniden picked apart it's design concepts to create the 146 GTL, later the 148. From there the basis for every big radio design was created to the top line Exports of today. Each step away the design got poorer in performance. Lo's more spectrally impure, RX noise floor got higher. No CB ever built and put on the market can out hear this model and never will.

 

all of mine seem to come with squelch monkies....

 

I have 2 of those gathering dust in my garage.

 

It's been a while since I have seen one ...

 

Galaxy DX949 P&T and an RFX 75 by Bells CB . I run a Wilson Trucker 2000 antenna. Finally got the SWR within reason, 1.2 on CH 1 and 1.8 on Ch40. For now I'm using the stock Cobra mic off my old Cobra 29 NW.

 

Connex 4400 turbo,Astatic 636-L mic,xforce TNT 600 HD,stalker 10k antennas,pronocer external speaker and Astatic 8mm coax.800 watt mobile,ten 4.

 

Astatic 8mm coax What the heck is 8mm coax

 

I must of been thinking of plug wires.LOL LMR 400 is that better.

 

Ok your thinkin of things like PL-259 or SO-239 connectors .... or maybe a old style mike plug
I use ONLY LMR400 it can't be beat on any band up to 3/4 meters ...

 

Yep, I was looking at some LMR 600 but It mite be a little to big for a truck I'm not sure,maybe Ill just stick with what I know works.