Rule about where to position a single steel coil on a flatbed

it looks as if the tandem pins are not engaged on the front so that could be the cause


i have never hauled a coil so i don't understand the chain issue..

i would think you should have chains and binders on both sides but maybe i off on that

 

Nebraskas old "dukes of hazard" bridges where the bridge was much higher than the road?

 

Mouse over the strip on the last photo, then when the viewer comes up click on it and if you've got Firefox, click Cntrl and + to magnify the photo, you can see the chains and straps hanging from the high end and across the flatbed deck. It looked like 5-6 chains to me and 2 straps.

 

Say ur getting 3 coils..1 is 30000..1 is 9000..1 is 7000..how can I load these..last time I centered them all with the big in middle..I'd like to separate them so its easier to tarp..when they were together it was a pain in the ###

 

Center the 30k, 9k to the rear, 7k to the front spaced evenly from center.

 

You should locate a single coil at the load center of the trailer. You should know how to locate the load center. I like to have mine marked on both sides of the deck.