My '02 international with C15 engine does not have a boost gauge or a suspension load gauge. Can you fellas give me tip on how to install both of these. Thanks
Adding gauges I don't have
Discussion in 'Trucks [ Eighteen Wheelers ]' started by silver dollar, Nov 12, 2012.
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Both of these are easy to do just simple air line hook ups. Use a bulkhead fitting to go through the firewall ( I think international should have spares in the firewall ). A hole saw will make holes for the gauges in the dash panel if you do not have holes already. Hook your boost gauge in one of the spare fittings on intake on the motor. The suspension load gauge just needs to be hooked into one of your airbag feed lines. This is all very easy just takes a little time to run and feed your airlines through.
silver dollar Thanks this. -
Does it matter which side of the charge air cooler the boost line is attached? (before or aft)
-
There is probably an unused fitting right on the head you can use.
silver dollar Thanks this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.