Truckers Report Jobs

Find Trucking Jobs

Company Driver Company Driver Dry Van Dry Van Flatbed Flatbed Refrigerated Refrigerated Specialized Specialized Owner Operator Owner Operator
More Trucking Job Searches ⌄ Fewer Trucking Job Searches
⌃

Kenworth T600 defroster

Discussion in 'Kenworth Forum' started by kwswan, Mar 30, 2013.

  1. Mar 30, 2013 #1
    kwswan

    kwswan Road Train Member

    1,939
    10,257
    Jul 26, 2009
    mcminnville,tn.
    0
    I have an 03 t600.I need to know how to get access into the defroster vents. My son laid his cell phone charger cord on the dash & it fell into the vent.It then proceeded to get caught in something & pulled in along with the plastic grate over the defroster vent.
    Whatever it is caught on is effecting the blend door controls because it won't switch from the floor to vent or defrost.
    I have already removed the blower motor from outside with no luck.What's next?
     
    kwswan, Mar 30, 2013
    kwswan, Mar 30, 2013
    #1
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Mar 30, 2013 #2
    eeb

    eeb Heavy Load Member

    731
    268
    Mar 24, 2013
    0
    Saw that happen with a penny once, another good reason not to set stuff on your dash. Had to take the dash apart to clear the obstruction, not sure where it'd be located on that model, sorry.
     
    eeb, Mar 30, 2013
    eeb, Mar 30, 2013
    #2
  4. Mar 30, 2013 #3
    seadog443

    seadog443 Light Load Member

    196
    62
    May 17, 2010
    Archdale NC
    0
    See if the glove box is removable, then you may be able to move the defrost tube some it will have a rivet or screw holding it to the up right do not remember, The dash center(wood grain part) may have 2 torx or phillps screws holding it removing them lets it fold down watch for plugs coming unpluged then you might be able to get to the vent that is all I can remember until I can find one to look at I hope you get it fixed will check back later
    mark
     
    seadog443, Mar 30, 2013
    seadog443, Mar 30, 2013
    #3
  5. Mar 30, 2013 #4
    kwswan

    kwswan Road Train Member

    1,939
    10,257
    Jul 26, 2009
    mcminnville,tn.
    0
    I did remove the glove box,that was no help. I will try removing the center dash panel & see if that helps.
     
    kwswan, Mar 30, 2013
    kwswan, Mar 30, 2013
    #4
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.