centramatic/balancemasters on spread axles

Discussion in 'Flatbed Trucking Forum' started by ColumbiaBoB, May 27, 2013.

  1. ColumbiaBoB

    ColumbiaBoB Light Load Member

    188
    21
    May 3, 2011
    Des Moines, IA
    0
    Hi, just wondering if it makes sense to put one of these on spread axle, thx
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. windsmith

    windsmith Road Train Member

    7,296
    6,032
    Sep 2, 2011
    NEPA
    0
    I was told by a tire guy that they are only useful for single tires, and they have no effect when used on dual tires. Not sure how accurate his statement was, but that's what I was told.
     
  4. Mommas_money_maker

    Mommas_money_maker Road Train Member

    1,122
    765
    Oct 2, 2011
    North Carolina
    0
    I only use them on steer axle where IMO they are the most useful. I know of another driver with them on his drives but you cannot tell a difference between my drives and his. All I do is rotate them.
     
    SHC Thanks this.
  5. Big Duker

    Big Duker "Don Cheto"

    2,921
    2,868
    Sep 18, 2007
    Weatherford, TX
    0
  6. BAYOU

    BAYOU Road Train Member

    2,847
    1,592
    Sep 23, 2010
    Beaumont,Tx
    0
    Don't get me started on this there not as great as everyone makes them out to be I spent $5,500 at there shop replacing everything on my front end 65,000 miles later tires are out of round I got them warrantyed only because we showed him all the work that had been done the rep said the balincers are my problem
     
  7. Sublime

    Sublime Road Train Member

    1,529
    1,896
    Jan 18, 2013
    Twin Cities, MN
    0
    I had them on the steers on a truck once. Hated them.
     
  8. ColumbiaBoB

    ColumbiaBoB Light Load Member

    188
    21
    May 3, 2011
    Des Moines, IA
    0
  9. BAYOU

    BAYOU Road Train Member

    2,847
    1,592
    Sep 23, 2010
    Beaumont,Tx
    0
    Ill start with what happen, I was going thru tires at 60,000 miles (580s) I put a new set on my truck with balincers I didn't make it but a half a mile and I was jumping all over the road turned around went back the did a aliment (3axle) took it back out same thing ended up taking them for a ride they took the tires off changed them out again....same thing took balincers off and problem solved.

    They wouldnt take them back so i called them derect and they talk me into going to there shop that's when they said all my bushings hangers tie rods king pins needed changed,they say its right but my tires are junk 24oz is a lot of weight if your tires are tru to start with
     
  10. SHC

    SHC Spoiled Rotten Brat O/O

    8,484
    7,047
    Feb 26, 2011
    Westville, IN
    0
    I have them on my steers and not a single problem. I have a little over 150K on my steers right now and they look like brand new and have plenty of tread left. My drives I just rotate every 100K and they still have 22/32 on them with 300K miles... Bridgestone's are all I've ever ran.
     
    Mommas_money_maker Thanks this.
  11. MJ1657

    MJ1657 Road Train Member

    7,521
    50,152
    Jan 28, 2012
    Isanti, MN
    0
    We run them on our drives and have had good luck.

    We have our steers spin balanced.
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.